• English
  • 中文
  • Français
  • Deutsch
  • Español
Contact Us
Home
Email
Follow Prosoft Technology on Twitter
Follow Prosoft Technology on Facebook
Follow Prosoft Technology on LinkedIn
Follow Prosoft Technology on YouTube
    • PROFINET Controller Module for ControlLogix®
    • EtherNet/IP™ to DH+ Gateway
    • Two-Port Building Automation Gateway
  • Solutions
    • Amusement
    • Automated Material Handling
    • Automotive
    • IIoT Solutions
    • Knowledge Base / Rockwell In-chassis / ControlLogix / MVI56 Series / MVI56-AFC

      Using AFC modules with corrected (net) flow as in input

      Search KB

      Catégories

      • Gateways
      • Rockwell In-chassis
        • Programmable Modules
        • CompactLogix
        • ControlLogix
          • MVI56E Series
          • MVI56 Series
            • MVI56-DNPSNET
            • MVI56-AFC
            • MVI56-MNETC
            • MVI56-GEC
            • MVI56-DNP
            • MVI56-104S
            • MVI56-PDPMV1
            • MVI56-MNET
            • MVI56-DFCM
            • MVI56-MCM
            • MVI56-BAS
            • MVI56-GSC
        • MVI94 - Flex I/O
      • Schneider In-chassis
      • Wireless
      • Accessories
      • Protocols
      • Software
      • Legacy Products
      • Certifications
      • Technical Support
      • Miscellaneous
      • vendredi 14 octobre 2016

      The AFC is not designed to receive a corrected flow input.

      However if the AFC is being used only for its accumulation and archive capabilities, then rather than the process temperature and pressure inputs, provide the meter's reference conditions as the AFC's temperature and pressure inputs.

      Typically 15C and 101.325kPa (SI) or 60F and 14.73 PSIA (US).

      Attachments

      Related Products