Floating point numbers (also known as 'real numbers') give a certain freedom in being able to represent both very large and very small numbers in the confines of a 32 bit word (that's a double word in our PLCs). Up until this point the range of numbers we were able to represent w...
Lire la suiteThe type mismatch error is always shown since the ProSoft In-Chassis modules do not support the additional functionality required to respond to this inquiry from the processor. This field does not reflect the status of the ProSoft In-Chassis module, and does not have any im...
Lire la suiteQ: I've read where it states that the battery is backup power for the CMOS. Is this where all the PCB configuration is stored or do the modules have ROM memory for the PCB configuration?A: With all the MVI46, 56 and 71 modules, configuration is either stored in CF, o...
Lire la suiteYes, the Ethernet port(s) will work with either cross-over cables or standard Ethernet patch cables to a switch or another device....
Lire la suiteSome Prosoft modules, such as the 69E and 69L families, have only the option to use CIP Connect over the backplane for configuration downloads and uploads in the Prosoft Configuration Builder (PCB). Other modules offer CIP Connect as an alternative to connecting directly to the c...
Lire la suitePlease download the attached document for the MVI56E firmware update procedure....
Lire la suiteOn the MVI56E platform configuration files get stored to the CompactFlash card. This way if the module fails the CompactFlash card can be placed in a replacement unit without the need for downloading a configuration to the module.Note: On the MVI56E-MCM and the MVI56E-GSC t...
Lire la suite