AN-X / AN-X2
How to figure out what the IP Address of an AN-X2 gateway is?
There are 2 ways to determine the current IP Address of an AN-X2 gateway. If AnxInit is installed on the PC, then AN-X2 modules will respond to the locate all query that can be found under the Utilities menu. (Note: AnxInit is not able to configure the IP Address of an AN-X2 ga...
Lire la suiteWhat does the mSD card do on the AN-X2 platform?
The purpose of the mSD card is to facilitate the swapping out of a failed AN-X2 gateway with a new AN-X2 gateway without the need for configuring the new gateway.The mSD card is used to store configuration files and the firmware files for the gateway. For the gateway to fun...
Lire la suiteWhat is the default IP Address of an AN-X2 gateway?
The default IP Address is 169.254.42.84...
Lire la suiteWhere can I get firmware for ProSoft products?
Firmware upgrades for Industrial Radios or AN-X(2) gateways can be found by navigating to the appropriate product on the following web page: http://www.prosoft-technology.com/SERVICES-SUPPORT/DownloadsFor firmware upgrades on all other products please contact your regional Techni...
Lire la suite