Knowledge Base / Gateways / AN-X / AN-X2

How to figure out what the IP Address of an AN-X2 gateway is?

Search KB

Catégories

There are 2 ways to determine the current IP Address of an AN-X2 gateway.

  • If AnxInit is installed on the PC, then AN-X2 modules will respond to the locate all query that can be found under the Utilities menu. (Note: AnxInit is not able to configure the IP Address of an AN-X2 gateway)

     

  • Power down the AN-X2 gateway and carefully remove the mSD card from the back of the unit. Then install the mSD card into the SD card adapter and place that into a computer (if prompted to fix the mSD card select Continue without scanning). In the root of the mSD card find a file named Config.txt. This file will show the current IP configuration.