EtherNet/IP™ to DH+ Gateway
What do you need help with?
Can my ProSoft or ProLinx DFCM module communicate through an Allen-Bradley 1747-AIC module?
The 1747-AIC module only converts the signal from RS-485 to RS-232. It does not convert the protocol from DH-485 to DF1, which the DFCM module requires. For DH-485 communications, check the ProSoft
Lire la suiteWhat do I do if I suspect that my MVI56-PDPMV1 master GSD file is corrupted?
If you are experiencing difficulty with the MVI56-PDPMV1 master configuration, you may have a corrupted GSD file. This can happen if you have up-graded your copy of Prosoft Configuration Builder ... MVI56-PDPMV1, PROFIBUS ... What do I do if I suspect that my MVI56-PDPMV1 master GSD file is corrupted?
Lire la suiteIs there a limit to the number of ProSoft modules I can place in my SLC chassis?
There are limits to the number of ProSoft modules that can be placed in your system's rack: 1. The number of available slots in the chassis. 2. The size of the power supply used for the chassis
Lire la suiteWhat is the difference between the 3150-MCM and the MVI46-MCM
registers for data transfer (3150-MCM has 4000) Has direct M1 files access for faster data throughput (3150-MCM must page 50 words of data to the processor at a time) Supports baud rates of up to 115
Lire la suiteWhat is the heat dissapation for MVI56, MVI56E, MVI69, MVI46 and MVI71 modules?
The heat dissipation for MVI56, MVI56E, MVI69, MVI46 and MVI71modules is as follows: The power ratings label states that the maximum current drawn from the ControlLogix backplane is 800 ma at 5.1
Lire la suite