EtherNet/IP™ to DH+ Gateway
What do you need help with?
I need to connect multiple DF1 devices to a single serial port on an SLC or MicroLogix processor, is there a solution?
port on the processor. Additional information can be found on the products web page: http://www.prosoft-technology.com/Products/Gateways/DF1-Serial-Port-Expander-Gateway/DF1-Serial-Port-Expander-Gateway ... DF1, multiplexor, serial port expander, multi-plexor ... I need to connect multiple DF1 devices to a single serial port on an SLC or MicroLogix processor, is there a solution?
Lire la suiteAccessing the Debug Menu on a DFCM (DF1) Prolinx module
All ProLinx modules with DFCM driver have no menu display on hyperterminal when pressing '?' key. Cannot access debug port. The DF1 pass-through port parameter is set to yes in the configuration ... Accessing the Debug Menu on a DFCM (DF1) Prolinx module
Lire la suiteCan any Prolinx module support com to SLC5/05 and 3 serial devices?
How can I connect more than one DF1 device to an Allen-Bradley processor's channel 0 port. You will need to use the serial port on a SLC505 to talk to 3 devices. Two of them are MicroLogix over
Lire la suiteWhy is COM port 1 not available on the AppSrvCE unit?
The latest AppSrvCE platform, v1.23, includes ELO USB and serialtouch screen drivers. COM1 is allocated by the touch screen serialdriver, whether or not a serial touch screen is actually present ... Why is COM port 1 not available on the AppSrvCE unit?
Lire la suiteHow can I monitor module and slave status with the MVI56-PDPV1 and other PDPMV1 PROFIBUS master modules?
The PDPMV1 operating state is stored in the MVIxxPDPMV1.Status.Fieldbus.FB_op_state tag: 00 = Offline 40 = Stop 80 = Clear C0 = Operate To determine slave status, the MVIxxPDPMV1.Status ... How can I monitor module and slave status with the MVI56-PDPV1 and other PDPMV1 PROFIBUS master modules?
Lire la suite