Two-Port Building Automation Gateway
What do you need help with?
What kind of radio frequencies does ProSoft offer?
ProSoft offers 900MHz, 2.4GHz, 5GHz, and Cellular (GSM/CDMA) frequency solutions
Lire la suiteHow do I figure out which lighting protector I need?
It usually depends on the frequency you are using. If you're using 900MHz, you will use LP-901 If you're using 2.4GHz or 5GHz, you will typically use LP-25001 There is exceptions when using 2
Lire la suiteI just powered up my ICX30-HWC, how do I access it?
address of the ICX30 to load up the default login page. Login with the default credentials of ADMIN and PASSWORD, and you are ready to configure your ICX30!
Lire la suiteWhat is the difference between LMR® 400 and LMR® 600 cable?
LMR® 600 is a thicker cable than the LMR® 400. You typically use LMR® 400 when going runs from 5ft to 40ft. Anything 50ft and above, you want to use LMR® 600. Because the cables will add loss
Lire la suiteHow can I use an AN-X2-AB-DHRIO to allow a SLC5/04 on DH+ to talk to a Panel View Plus on EtherNet/IP
There are currently special restrictions on communicating with a SLC5/04 via DH+ with a Panel View Plus using EtherNet/IP through our AN-X2-AB-DHRIO, please see the attached tech-note for full ... How can I use an AN-X2-AB-DHRIO to allow a SLC5/04 on DH+ to talk to a Panel View Plus on EtherNet/IP
Lire la suite