Two-Port Building Automation Gateway
What do you need help with?
How can I prevent the user of an MVI56-BAS module from modifying the BASIC program while installed on a customer site?
module for production: Write the program and test it in RAM. Use PROG to transfer the program from simulated RAM to ROM 1 of the simulated EEPROM on the Compact Flash card. Use PROG2 to tell
Lire la suiteSLC 5/03 RTU faults after download or after clicking on the Read I/O Config button
This issue affects applications using RSLogix 500 version 7.1, 7.2, or 7.3. The issue was corrected in version 7.3.1 of RSLogix.
Lire la suiteMy AN-X2-AB-DHRIO Web GUI seems to be missing the Automation Network tab, what does this mean?
The AN-X2-AB-DHRIO is a multi-purpose gateway which comes shipped with multiple Firmware options already installed on the module, but only one Firmware can be active at any given time. Each ... My AN-X2-AB-DHRIO Web GUI seems to be missing the Automation Network tab, what does this mean? ... AN-X2,GUI,DHRIO, WEB, DHP, ADP, DRV, DRV-04, HMI, SCAN, RIO-EIPSCN, EIPSCN, ASB, 1794-ASB, Data Highway Plus Bridge, Remote I/O (RIO) Adapter, VFD Drive, Remote I/O (RIO) HMI, Remote I/O (RIO ... My AN-X2-AB-DHRIO Web GUI seems to be missing the Automation Network tab, what does this mean?
Lire la suiteHow does field server modbus driver handle floats
_Float_Swapped respectively. Example Syntax would be: Moves Function , Source_Data_Array, Source_Offset, Target_Data_Array, Target_Offset, Length Join_Float, Your_Integer_Array , 0 , Your_Float_Array , 0 , 2 Length
Lire la suiteHow can I connect my 4 wire RS-485 device to my ProSoft communication device?
The Prosoft communication module supports 2-wire RS-485 communications. Although not officially supported, it is possible to get at least some 4-wire RS-485 devices to communicate using
Lire la suite