Two-Port Building Automation Gateway
What do you need help with?
The BATT LED on my ProSoft MVI module is RED. How can I fix this problem?
the BIOS settings which are checked during the boot up of the MVI module. The battery needs to maintain a voltage between 2.3 and 3.7 VDC in order for the BATT LED to be off. If the battery drops below 2
Lire la suiteWhen configuring Siemens ET200M slave (possible other complex PROFIBUS slaves), 1. PDPM master failed to read PT100 AI inputs. 2. Sycon software failed to configure slave parameters, error messages we
"error reading user param data!" ProLinx PROFIBUS DPV0 master all PDPM SYCON EDT200M revision 4, 5 and 6000 series v2.65 and earlier 1. it was necessary to upgrade PROFIBUS master configuration ... When configuring Siemens ET200M slave (possible other complex PROFIBUS slaves), 1. PDPM master failed to read PT100 AI inputs. 2. Sycon software failed to configure slave parameters, error messages
Lire la suiteHow do I increase my ReadData array for an MVI56-MCM module?
, make sure you have saved a copy of this file before making this change.2. Within the readdata ladder file, rung 2, there is a lim statement that looks for mcm.bp.lastread to be between 1 and 3
Lire la suiteDoes the AN-X(2)-GENI support both Phase A and Phase B GE Genius I/O Blocks?
Yes the AN-X(2)-GENI gateway supports both Phase A and Phase B Genius I/O blocks. Please note that they must be used in a valid Genius Bus configuration. ... Does the AN-X(2)-GENI support both Phase A and Phase B GE Genius I/O Blocks?
Lire la suiteI upgraded my RSLogix5000 software from an older version to Version 16 and now the clock in my MVI56 module does not seem to show the correct time. Why not?
product web page for your specific module or contact ProSoft Technical Support for assistance.
Lire la suite