Two-Port Building Automation Gateway
What do you need help with?
Do ProSoft AFC flow computer solutions support energy calculations according to the ISO-6976 standards?
reference temperature. As for how these standards compare with the specifications of the ISO-6976 Standard, please consider the following: 1. Energy (heating value, calorific content): As stated before
Lire la suiteWhat is the correct function code to use when reading and writing with an MBP Modbus Plus module?
The MBP Modbus Plus modules use the modicon quantum MSTR commands. MSTR 1 is used for a write command. MSTR2 is used for a read command. The modules support the 4XXXX range addressing
Lire la suiteCan the MVI46 or 3150 modules be placed in a remote rack?
No. The MVI46 and 3150 module can only reside in the local or extended rack. Many times a ProLinx 4601-RIO-MCM can work in this type of application. The usage of M1 and M0 files prevents the module
Lire la suiteWhy is the bit or coil level data incorrect?
function codes 1, 5, and 15), the internal address specified in the command must be at the bit level. Example: If the command is issuing a bit read (function code 1), and you wish to place the data ... Modbus Coil Commands, FC1, FC2, FC5, FC15, Modbus bit level commands, bit level addressing, coil level addressing,
Lire la suiteHow can I create the Device Definition Table and Modbus Plus Route Paths?
. The attached document for a Schneider/Modicon BM85 BridgeMultiplexer, in Section 2.1, provides a detailed description of ModbusPlus device paths with examples of how diverse the answer to thisquestion might be
Lire la suite