EtherNet/IP™ to DH+ Gateway
What do you need help with?
Changing the amount of data returned by class 0 polls as a server
was not supporting by the original Add-On Instruction, if you are having trouble getting this process to work and you are not running the latest AOI, it is strongly recommended that you update to an AOI of rev 1.3
Lire la suiteWhat steps should I take to diagnose a Fieldserver product?
specifically for that connection. From there, click the Error Stats tab. This will show you total errors, and below that, the name of every type of error that is being generated. 3) In the event some of your
Lire la suiteHow do I upgrade my RLX-OPC Server?
copy if the installer asks to Repair or Remove] then try to uninstall the old OPC Server (1.0.3 etc) after that.b. If the old one comes off. i. Uninstall the new version too, then reinstall a clean copy
Lire la suiteCan theProLinx Remote I/O module (RIO) function as a remote I/O scanner?
All 4xxx and 5xxx AB Remote I/O gateways function as Remote I/O Adapters. These gateways support a single BTR and a single BTW. It is possible to configure rack address, and as 1/4, 1/2, 3
Lire la suiteWhat is the purpose of the UseGuardBand/GuardBandTime or InterCharacterDelay parameters in an MCM module?
-drop network (RS-422 or RS-485 wiring). In RTU mode, when the module receives sequence of data from another node, it will recognize the end of the message when it detects a 3.5 character gap. The next byte
Lire la suite