EtherNet/IP™ to DH+ Gateway
What do you need help with?
Changing the amount of data returned by class 0 polls as a server
_DNP_Input_Database and the DNPNET_DNP_Output_Database UDTs (User-defined Data Types). Be aware that as Binarys are stored in arrays of decimals, the minimum size is 16 binaries (array size 1). Also be aware that the UDTs can only
Lire la suiteWhat steps should I take to diagnose a Fieldserver product?
1) Assuming you can still at least connect to the Fieldserver, the first thing you should always do is connect to the web GUI (put the ip address of the field server product into a web browser
Lire la suiteHow do I upgrade my RLX-OPC Server?
Server from Add/Remove Programs2. If uninstall failed SavedState Error, Can't Uninstall message etca. To get the old one off, one way is to Install the newest version (1.1.8) over the top [repair the old
Lire la suiteCan theProLinx Remote I/O module (RIO) function as a remote I/O scanner?
All 4xxx and 5xxx AB Remote I/O gateways function as Remote I/O Adapters. These gateways support a single BTR and a single BTW. It is possible to configure rack address, and as 1/4, 1/2, 3
Lire la suiteWhat is the purpose of the UseGuardBand/GuardBandTime or InterCharacterDelay parameters in an MCM module?
of ladder logic, set the Use Guard Band to "1" to enable this feature and set the Guard Band Time to any value greater than 8 (milliseconds.) Values between 10 and 25 are typical; but certain applications may
Lire la suite