Two-Port Building Automation Gateway
What do you need help with?
Can theProLinx Remote I/O module (RIO) function as a remote I/O scanner?
All 4xxx and 5xxx AB Remote I/O gateways function as Remote I/O Adapters. These gateways support a single BTR and a single BTW. It is possible to configure rack address, and as 1/4, 1/2, 3
Lire la suiteWhat is the purpose of the UseGuardBand/GuardBandTime or InterCharacterDelay parameters in an MCM module?
-drop network (RS-422 or RS-485 wiring). In RTU mode, when the module receives sequence of data from another node, it will recognize the end of the message when it detects a 3.5 character gap. The next byte
Lire la suiteCan I configure my ProLinx 4xxx or 5xxx series gateway via Ethernet?
The only way to configure or debug a 4xxx or 5xxx series ProLinx gateway is through the serial Debug/Config port. ... Can I configure my ProLinx 4xxx or 5xxx series gateway via Ethernet?
Lire la suiteWhat IEC 60870-5-101S timestamp formats are supported?
The following two IEC 60870-5-101 slave protocol timestamp formats are supported: CP56time 2a - Seven octets binary time, and CP24time 2a - three octets binary time For details reference ... 60-870-5-101, timestamp ... What IEC 60870-5-101S timestamp formats are supported?
Lire la suiteHow to upload a configuration file from 4xxx or 5xxx Gateway?
It is recommended to use ProSoft Configuration Builder to upload and download configuration files to 4xxx and 5xxx series gateways. ProSoft Configuration Builder is provided free of charge and can ... How to upload a configuration file from 4xxx or 5xxx Gateway?
Lire la suite