Two-Port Building Automation Gateway
What do you need help with?
The BATT LED on my ProSoft MVI module is RED. How can I fix this problem?
.3 VDC, then the battery will be unable to maintain the BIOS settings for the module; but, when the module is booted up they will be restored by the application code. If the battery voltage falls below 1.5
Lire la suiteWhen configuring Siemens ET200M slave (possible other complex PROFIBUS slaves), 1. PDPM master failed to read PT100 AI inputs. 2. Sycon software failed to configure slave parameters, error messages we
"error reading user param data!" ProLinx PROFIBUS DPV0 master all PDPM SYCON EDT200M revision 4, 5 and 6000 series v2.65 and earlier 1. it was necessary to upgrade PROFIBUS master configuration
Lire la suiteHow to resolve an issue where Siemens Step 7 software displays a message indicating that the ProSoft GSD file cannot be interpreted.
'prlx05a5_v1.gsd' cannot be interpreted.' ... prlx05a5_v1.gsd, Step 7,
Lire la suiteI am using an MVI56-MCM module in pass thru mode, and I cannot write to address 0417 or greater?
passthru function code 5 or 15 within the expanded sample ladder logic, only an array of 416 bits was allocated for the passthru logic (to conserve clx processor memory).
Lire la suiteHow do I increase my ReadData array for an MVI56-MCM module?
. For 2000 words of readdata we will need this to be between 1 and 10.The module pages data in blocks of 200 words. The first block has a block index of 1, and contains the first 200 words of data from
Lire la suite