Two-Port Building Automation Gateway
What do you need help with?
How can I determine what hardware BIOS is installed on my MVI94?
Please use the following procedure: 1 - Power down the MVI94. 2 - Remove it from the base. 3 - Place the Setup jumper to short both pins, as shown in the diagram on the side of the module. 4
Lire la suiteWhat are the physical dimensions for the 5000 series ProLinx module
The dimensions for the 5000 series ProLinx module are: ProLinx Plus (aluminum enclosure) standard 5.20h x 2.07w x 4.52d inches 13.2cmh x 5.25cmw x 11.48cmd extended 5.20h x 2.73w x 4.52d
Lire la suiteWhere can I locate the User Manual for the MVI46-MCM
All User Manuals for Prosoft Technology products can be found on the product pages of our website, or on the CD supplied with the product. <="" user="" mvi46-mcm="" a=""> Related Keywords
Lire la suiteWhat effects does harsh weather have on my RadioLinx product's signal attenuation?
In general, weather conditions have little to no effect on the RF signal of a 2.4ghz system. For 2.4ghz systems, you may find attenuation up to 0.08 db/mile (0.05db/km) in the heaviest of rain
Lire la suiteWhat direction does the data flow in the PDPS PROFIBUS Slave module
In 4xxx PDPS Gateways: The data movement in the PROFIBUS Slave module (PDPS) is as follows: Input registers (0 - 99) move from the PROFIBUS Slave module to the PROFIBUS Master. Output registers
Lire la suite