Two-Port Building Automation Gateway
What do you need help with?
How to upload a configuration file from 4xxx or 5xxx Gateway?
click on the module and select Choose module type (select your gateway) 3)right-click and select upload from device to PC 4) To the PC connect the Null Modem Cable (Cable 15) with the Mini-Din - DB9
Lire la suiteProgramming an SLC 5/04 over DH+ through a ProLinx module.
the ProLinx with the pass thru set to see the DH+ network Related Keywords: typical connection layout ProLinx module 4102-DFS3-DFM RSLogix500 Rockwell automation processor SLC 5/04
Lire la suiteI need to connect more than one Modbus master devices to the same Modbus slave device.
The Modbus master devices are connected to the 3 Modbus slave ports of the ProLinx module. The Modbus slave device is connected to the Modbus master port of the ProLinx module. You can increase
Lire la suiteWhat Ethernet ports are required for Prosoft PLC modules and gateways?
to Ethernet media converters with MBTCP and MNET products. TCP 20000 DNP3 over Ethernet - DNPNET, DNPSNET products UDP 20000 DNP3 over Ethernet - DNPNET, DNPSNET products UDP 47808 BACNET IP - Slotserver
Lire la suiteMy MVI69 module is not working. What might be wrong?
and begin normal operation. 3. The MVI69 modules need 800mA of 5vdc current from the backplane. If the power supply is inadequate, the module will not function normally. 4. The MVI69 modules have a Power
Lire la suite