Knowledge Base

Two-Port Building Automation Gateway

Catégories

What do you need help with?

NEW PLX32 Gateways - Features and Limitations

Capabilities and Limitations: * Each PLX32 will have two independently-addressable Ethernet ports, P1 (right-hand port) and P2 (left-hand port). * Each of the two Ethernet ports MUST be configured on different

Lire la suite

Why are MMS Reports not working?

to be that someone made changes to the report and downloaded the changes to the 61850 Server (Slave) without changing the Report configuration in the PLX8x- 61850 Client. 2.Ensuring that a report is triggered

Lire la suite

What is the default IP Address of an AN-X2 gateway?

AN-X2, IP Address, ... What is the default IP Address of an AN-X2 gateway?

Lire la suite

MicroLogix 1400 MSG commands with AN-X(2)-AB-DHRIO in DH+ mode

micrologix_1400_for_an-x2-ab-dhrio.docx mlx1400_an-x-ab-dhrio.rss ... EtherNet/IP Message sample using a MicroLogix 1400 through a AN-X(2)-AB-DHRIO, to communicate with a processor on the DH+ network. ... EtherNet/IP Message sample using a MicroLogix 1400 through a AN-X2-AB-DHRIO, to communicate with a processor on the DH+ network. ... MicroLogix 1400 MSG commands with AN-X(2)-AB-DHRIO in DH+ mode

Lire la suite

Issue importing ICD device template file into the 61850 Configuration manager

address for the device, so this is certainly not standard, but to support this vendor we allow a configured .ICD file to be imported in the software.  2)      The configuration tool does not allow the same

Lire la suite