Two-Port Building Automation Gateway
What do you need help with?
Can the ProSoft/ProLinx Ethernet I/P products (DFNT driver, exp MVI46-DFNT, 5201-DFNT-MCM, PTQ-DFNT, etc…) communicate with any EtherNet I/P device?
/SLC messages option within RSLogix 5000 will allow you to configure a logical tag name (like Pump1Flow) to a file number like file 10. Depending on the data type of the tag Pump1Flow, this will either need
Lire la suiteWhat is the difference between Modbus, Modbus Plus, and ModbusTCP/IP?
Modbus is a serial master/slave protocol. Modbus can run over any serial type media (copper, fiber, wireless, modem, etc..) Modbus Plus is a peer-to-peer protocol which runs at 1 mbs. The Modbus
Lire la suiteI have multiple Modbus masters that need to communicate with 1 or more Modbus serial (RTU) slave devices. What product should be used??
from 1 or more Modbus serial slave devices to be shared with multiple masters. ... I have multiple Modbus masters that need to communicate with 1 or more Modbus serial (RTU) slave devices. What product should be used??
Lire la suiteThe Wallclock in my ProSoft MVIxx-AFC module seems to be showing Greenwich Mean Time (GMT or Universal Time) instead of Local Time. How do I get it to use Local Time?
and installing the latest version of the AOI from the appropriate product web page Downloads link. If you decide to use the newest AOI, please be sure to delete the previous AOI ladder instruction and rungs
Lire la suiteWhat are the default IP Addresses on an AppSrvCE unit?
The factory default configuration of the AppSrvCE Ethernet Ports is as Follows: Left Port: IP = 192.168.0.1 NetMask = 255.255.255.0 Right Port: IP = Is obtained using DHCP The easiest way
Lire la suite