EtherNet/IP™ to DH+ Gateway
What do you need help with?
What steps should I take to diagnose a Fieldserver product?
that, the name of every type of error this specific map descriptor is generating. 4) In the event that you are still not able to determine the issue, download Fieldserver's Toolbox (At the time
Lire la suiteCan theProLinx Remote I/O module (RIO) function as a remote I/O scanner?
All 4xxx and 5xxx AB Remote I/O gateways function as Remote I/O Adapters. These gateways support a single BTR and a single BTW. It is possible to configure rack address, and as 1/4, 1/2, 3/4
Lire la suiteWhat is the purpose of the UseGuardBand/GuardBandTime or InterCharacterDelay parameters in an MCM module?
1200: 32 2400: 16 4800: 8 9600: 4 19200: 2 28800: 2 38400 2 57600: 1 115200: 1 If you still observe a considerable number of communication errors, try to increase the Guard Band Time value (in
Lire la suiteWhat is the purpose of the last 4 branches of Rung 1 of Start/Power Up?
These branches have no purpose in normal operation. However, if it is necessary to write a string longer than 200 characters write-wait logic will have to be added to the ladder. In that case the 4 ... What is the purpose of the last 4 branches of Rung 1 of Start/Power Up?
Lire la suiteCan I configure my ProLinx 4xxx or 5xxx series gateway via Ethernet?
The only way to configure or debug a 4xxx or 5xxx series ProLinx gateway is through the serial Debug/Config port. ... Can I configure my ProLinx 4xxx or 5xxx series gateway via Ethernet?
Lire la suite