DeviceNet Router/B
What do you need help with?
Can I add the 40Gb IDE hard drive to my PC56-XP to supplement the originally installed 4Gb Compact Flash Card?
Unfortunately, it is not possible to add the 40Gb IDE drive to a PC56-XP that came with a 4Gb Compact Flash (CF) card installed. Due to limitations of the PC56 BIOS, you can use either the CF card ... Can I add the 40Gb IDE hard drive to my PC56-XP to supplement the originally installed 4Gb Compact Flash Card?
Lire la suiteWhat AGA specification version is used for Flow Calculations in the ProSoft MVIxx-AFC modules?
", dated 1992; and Part 4 "Background, Development, Implementation Procedure", dated 1992. We based our AFC programming on the information in Part 4, particularly the Implementation Procedure; which means
Lire la suiteIn the IEC 60870-5-104 protocol, what is the purpose of the "RESET_PROCESS" command, "C_RP_NC_1"; and what does it do?
procedure to close an open socket connection. On page 45 of the protocol specification, it describes the process as: Figure 20 shows the controlling station establishing a connection by giving an Active
Lire la suiteHow do I change the name and address of the Site Operator in my Opacts/TermLinx application?
the active site as usual. (2) Menu (3) In the window that opens, click "find". (4) In the list to the left, click (highlight) the entry that represents your site (5) In the panel to the right, note
Lire la suiteWrite commands of my DFCM module are returning error code (FFF4) -12. What does this mean?
The FFF4 (decimal -12) error code indicates that the reply data does not match the requested byte count. An issue with firmware version 1.42 caused all write commands to report a -12 (FFF4). Any ... Write commands of my DFCM module are returning error code (FFF4) -12. What does this mean?
Lire la suite