LP-901 In-line Lightning Protector for Cellular Antennas

In-Line Lightning Protector for Cellular Antennas


The LP-901 Lightning Protector is designed to provide multi-strike direct current (dc) voltage-blocking lightning protection for antennas operating between 698 MHz and 2.7 GHz, including 3G/4G/LTE cellular antennas. The LP-901 lightning protector is designed for use inside an enclosure with the bulkhead fitting side protruding through to the outside of the enclosure. The connectors are a standard N female on the protected side to a standard N female bulkhead on the surge side. The bulkhead fitting can be connected to any standard N-type connector extension cable.

Caractéristiques Avantages

  • Bi-directional operation
  • High surge current capability
  • Low let-through voltage and throughput energy
  • DC shorted filter design, no DC continuity between center pins
  • Ideal use for applications where DC is not required on the coaxial cable
  • Fully weatherized housing
  • Elongated female connector allows for mounting through a 1/4” bulkhead or grounding bar
  •  Multi-strike capability


The LP-901 Lightning Protector is designed to provide protection for 900MHz wireless systems and 3G/4G/LTE cellular systems with low RF loss and excellent surge protection




Protected Side Connector

N Female Bulkhead

Surge Side Connector

N Female Bulkhead

RF Power

500 W / 750 W (at 50°C)

Frequency Range

698 to 2700 MHz

Voltage Standing Wave Ratio (VSWR)

≤ 1.1:1

Insertion Loss

≤ 0.1 dB

Operating / Storage Temperature

-50°C to +85°C


Agency Approvals & Certifications

IEC 60529 IP67                                                                                                                    

Bellcore # TA-NWT-00487 Procedure 4.11, wind driven

RoHS compliant


LP-901 - Datasheet 312,29 kB Dernière Modification 14/09/2017