LMR Cable 195/400/600

LMR® 600 Cables


ProSoft Technology supplies cables that provide the lowest attenuation and are pre-cut and assembled with connectors at the factory to ensure ultimate reliability and customer satisfaction.

LMR® 600 Type Cables are ideal for antenna feed runs greater than one-hundred feet.

LMR® is a registered trademark of Times Microwave Systems

Caractéristiques Avantages


With a 1.5-inch minimum bend radius, the LMR®-600 cable can be easily routed into and through tight spaces without kinking

Low Loss

LMR® 600 has the lowest loss of any ½-inch superflex cable. This is achieved through the use of a high velocity gas-injected closed cell foam dielectric, and bonded aluminum tape outer conductor.


The UV protected black polyethylene jacket makes the cable rugged and resistant to the full range of outdoor environments.

RF Shielding

The bonded aluminum tape outer conductor is overlapped to provide 100% coverage, resulting in >90 dB RF shielding (>180 dB crosstalk) and excellent interference immunity (ingress and egress).

Phase Stability

The intimately bonded structure and foam dielectric of LMR® cables provide excellent phase stability over temperature and with bending. The high velocity dielectric results in superior phase stability as compared with solid and air-spaced dielectric cables.

Backed by ProSoft Technology®

Industrial data communications experts who understand your protocols, devices, and applications.

Three year standard warranty.


LMR® 600 Type Cables are ideal for antenna feed runs greater than one-hundred feet.


Mechanical Specifications


Installation Bend Radius

1.5 inches (38.1 mm)

Repeated Bend Radius

6 inches (153 mm)

Bending Moment

2.75 ft lbs (3.73 N-m)


0.131 lb/ft (0.20 kg/m)

Tensile Strength

350 lbs (158.9 kg)

Flat Plate Crush

60 lb/in. (1.07 kg/mm)

Environmental Specifications


Installation Temp Range

-40° / +185°F (-40° / +85°C)

Storage Temp Range

-94° / +185°F (-70° / +85°C)

Operating Temp Range

-40° / +185°F (-40° / +85°C)

Electrical Specifications


Voltage Withstand

4000 VDC

Peak Power

40 kW

Jacket Spark

8000 VRMS

Attenuation Average @ 900 MHz


dB/100 ft


dB/100 m


Attenuation Average @ 2500 MHz


dB/100 ft


dB/100 m


Attenuation Average @ 5800 MHz


dB/100 ft


dB/100 m