PROFIBUS DP Ethernet UDP Gateway
AN-X3-PB
The AN-X3-PB acts as a gateway between a PROFIBUS DP network and an Ethernet network using cyclic UDP messages. The AN-X3-PB has a web interface for configuration of PROFIBUS and Ethernet properties. The AN-X3-PB connects a PC or other device to a PROFIBUS network.
Caractéristiques Avantages
- Configures through a web browser (No special configuration software required).
- Customizable configuration files provide additional flexibility.
- Supports offline configuration through a .CSV file.
- View diagnostics with a web browser enabling remote monitoring and troubleshooting.
Spécifications
PROFIBUS DP
- Acts as one or more Active DP Slave Nodes, up to a total of 125.
- Monitors the I/O data from all other DP Slave Nodes on the network.
- Maintains PROFIBUS DP Slave Node List.
- Maintains PROFIBUS Diagnostic Counters.
- Supports baud rates of 9600bps to 12 Mbps.
Ethernet UDP
- Supports up to 16 UDP Send blocks and up to 16 UDP Receive blocks.
- Each block supports a standard frame size (MTU) of up to 1500 bytes.
- With Ethernet, IP, UDP and QTS overhead, there are 1448 bytes or 362 DWORDS (32 bits) available to map PROFIBUS diagnostics and data.
- Both Unicast and Multicast frames are supported.
Matériel
Hardware Specifications
| Specification |
Description |
| Maximum Power Consumption |
160 mA at 12 VDC, 80 mA at 24 VDC |
| Maximum Power dissipation |
2 Watts |
| Operational Temperature |
0°C to 50°C (32°F to 122°F) |
| Storage Temperature |
-40°C to 85°C (-40°F to 185°F) |
| Relative Humidity |
5% to 85% without condensation |
Hardware Features
- Ethernet RJ45 connector
- 9-pin D Shell connector to connect to the PROFIBUS network
- 3-pin Phoenix power connector
- microSD card for storage of configuration data and firmware