Bringing PROFINET & Modbus Together
ProSoft Technology’s PROFINET® to Modbus® or Modbus® TCP gateways allow your PROFINET-based Siemens® or GE controller to connect to any Modbus or Modbus TCP-compatible device. With millions of PROFINET nodes worldwide and even more Modbus/Modbus TCP devices, the need for a gateway that will allow these two widely used protocols to communicate is self-evident. ProSoft offers four versions to give you the best solution for your application.
Modbus TCP/IP Two-Port to PROFINET Device Gateway
|
Have an OEM piece of equipment and do not want to change all the IP addresses just to have it communicate with your current PLC? This version offers bi-directional data transfers between a PROFINET Controller and Modbus TCP devices. The dual Ethernet ports allow you to pass data between Modbus TCP and PROFINET devices that are on different subnets. |
Modbus TCP/IP to PROFINET Device Gateway
|
Are your devices all on one subnet? This version offers bi-directional data transfers between a PROFINET Controller and Modbus TCP networks. Our Modbus TCP driver has multiple clients and servers to support many different types of application. |
Modbus Serial Four-Port to PROFINET Device Gateway
|
Are your Modbus devices on several Modbus networks? This version offers bi-directional data transfers between a PROFINET Controller and Modbus serial (RTU and ASCII) devices. This four-port Modbus gateway is perfect for applications that need data from several Modbus serial networks. |
Modbus Serial to PROFINET Device Gateway
|
Need to connect to just one serial network? This version offers bi-directional data transfers between a PROFINET Controller and Modbus serial (RTU and ASCII) devices. The single serial port can be configured as either a Modbus master or slave. |