-
Solutions
- Amusement
- Automated Material Handling
- Automotive
- IIoT Solutions
-
LonWorks QuickServer Gateways
PS-QS-1x11-F
The QuickServer line of communication gateways are designed to link building automation networks utilizing LonWorks with industrial control networks communicating on BACnet/IP, EtherNet/IP, Modbus TCP/IP, and Modbus RTU. The QuickServer gateways are available with limits of up to 250 or 500 points of application data.
QuickServer, by FieldServer, is a high performance, fully configurable, cost effective Building and Industrial Automation gateway for integrators to easily interface devices to networks in commercial buildings and industrial plants.
System integrators world-wide have benefited from the value of the powerful line of interoperability gateways offered by FieldServer. Now, QuickServer adds to that value by running the same robust FieldServer protocol conversion software on a highly cost effective platform backed by the experience, engineering expertise and proven technical support that integrators have come to expect from ProSoft Technology.
Common combinations of drivers include Modbus RTU, Modbus TCP, BACnet/IP®, BACnet MS/TP, LonWorks® and JCI Metasys® N2. QuickServer is ready to configure for the specific application. All necessary instructions and software are included with QuickServer.
PS-QS-1011-F (250 points)
PS-QS-1211-F (500 points)Images
Click on image(s) to enlarge
Caractéristiques Avantages
- Ability to interface up to 250 or 500 points of common BAS protocols depending on gateway
- Multi-configuration capability; specific configurations selectable via DIP switches or software
- DIN rail mount included with gateway
- DIP switches to select baud rate or node ID on the fly
- BACnet COV support for fast data communication while reducing the traffic over a BACnet network. BTL Marked (PS-QS-1X10-XXXX) and LonMark Certified (PS-QS-1X11-XXXX)
Spécifications
Field Connections
- Ethernet 10/100 RJ45
- Serial RS-485 terminal (up to 115K baud)
- FTT-10 LonWorks port
Other
- Configuration/Diagnostic utilities
- Capacity: 250 or 500 Points
- Table, Wall or DIN rail mount
Approvals
- TUV approved to UL 916 standard
- CE Mark
- BTL Mark (PS-QS-1010)
- RoHS Compliant
- FCC Part 15 Compliant
Matériel
Environment
- Operating temperature: -40°F to 167°F (-40°C to 75°C)
- Relative humidity: 5% to 90% RH, with no condensation
Power Requirements
- 9 to 30 Vdc or Vac or 5 Vdc
- Current draw 250mA @ 12V
Physical Dimensions
- W x D x H: 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
- 0.4 lbs (0.2 Kg)
Téléchargements
PS-QS-1x11-F Datasheet 168,57 kB Dernière Modification 09/08/2023 QuickServer Setup Guide 2,84 MB Dernière Modification 27/07/2020 FieldServer Toolbox Setup 12,05 MB Dernière Modification 27/07/2020 SlotServer/QuickServer - Legacy Configuration & Debug Software (all products) 17,04 MB Dernière Modification 11/09/2015 Protocol Driver and Configuration Manual PS-QS-1x11-F 4,70 MB Dernière Modification 09/08/2023 Certifications
Declaration of Conformity (RoHS\CE) 426,18 kB Dernière Modification 17/12/2020 Declaration of REACH Compliance 593,33 kB Dernière Modification 17/12/2020 UKCA Certification 327,80 kB Dernière Modification 12/05/2022 BACnet Conformance Certificate 1,15 MB Dernière Modification 09/10/2024