FOUNDATION™ Fieldbus H1 Master for EtherNet/IP™ and Modbus® TCP
A-FFL/B
The FF Link module simplifies the implementation of FOUNDATION™ Fieldbus H1 by combining an EtherNet/IP™ and Modbus® TCP Linking device with an internal isolated power conditioner and bus terminator.
The FF Link supports module redundancy when in EtherNet/IP target mode, allowing two FF Link masters to be connected to the same H1 segment in a one-active-one-standby strategy.
Configuration is achieved using Aparian's free-downloadable Slate configuration environment. Slate generates H1 device specific UDTs and mapping code which can be imported into Studio 5000, allowing even complex systems to be configured in minutes.
Images
|
|
|
|
Caractéristiques Avantages
- Operates as a FOUNDATION™ Fieldbus H1 Master.
- Supports up to 32 FOUNDATION™ Fieldbus H1 field devices.
- Module has various configurable primary interfaces:
- EtherNet/IP Target
- Modbus TCP Server
- Modbus TCP Client
- EtherNet/IP Originator (Class 1- connections 10 and Explicit Messaging with up to 10 EtherNet/IP devices).
- Provides a built-in Isolated Power Conditioner that can supply up to 420mA.
- Allows the use of external Power Conditioners for Intrinsically Safe (IS) applications.
- Provides a built-in software enabled Fieldbus terminator.
- Dual Ethernet ports which support Device-Level-Ring (DLR).
- Built-in H1 and Modbus packet capture.
- Supports detailed H1 live list, H1 Alert (Alarm) extraction, and H1 Master Redundancy
- Device Specific UDT, tag and logic generation for import into a Studio5000 project.
- Network Time Protocol (NTP) supported for external time synchronization.
- Device Type Manager (DTM) supported.
- Online change configuration supported.
- Optional Advanced H1 scheduling.
Spécifications
Ethernet
| Specification |
Description |
| Connector |
RJ45 |
| Conductors |
CAT5 STP/UTP |
| ARP Connections |
100 max. |
| TCP Connections |
100 max. |
| CIP Connections |
20 max. |
| Communication Rate |
10/100 Mbps |
| Duplex Mode |
Full / Half |
| Auto-MDIX |
Supported |
| Embedded Switch |
Yes, 2 x Ethernet ports |
| Device Level Ring (DLR) |
Supported |
| Network Time Protocol (NTP) |
Supported |
Modbus TCP Client
| Specification |
Description |
| Modes Supported |
Modbus TCP |
| Modbus Server Devices |
20 max. |
| Modbus Mappings |
100 max. |
| Mapping Ranges |
Holding Register: 0 to 65535 |
| Base Offset |
Modbus (base 0), PLC (base 1) |
| Configurable Modbus TCP Port |
Yes |
| Data Re-formatting Supported |
BB AA |
Modbus TCP Server
| Specification |
Rating |
| Modes Supported |
Modbus TCP |
| Mapping Ranges |
Holding Register: 0 to 65535 |
| Base Offset |
Modbus (base 0), PLC (base 1) |
H1
| Specification |
Description |
| Connector |
3-way terminal |
| Conductor |
24 to 18 AWG |
| LAS |
Supported |
| H1 Alarming |
Supported |
| Intrinsically Safe (IS) Applications |
Supported |
| Advanced H1 Scheduling |
Supported |
| Maximum Slave Devices |
32 |
| Isolated |
Yes |
|
Internal Power Conditioner |
Max: 23.0 VDC |
|
Internal Power Conditioner |
Max: 420 mA – Max. Ambient Temperature <= 50 °C |
| Internal Termination |
100 Ω - Software Enabled |
EtherNet/IP Target
| Specification |
Description |
| Class 1 Connection Size |
Max. Input Size: 500 bytes (492 bytes mapped data) |
| Class 1 Connection Count |
1 to 4 |
| Class 3 Messaging Supported |
Yes |
| UCMM Messaging Supported |
Yes |
EtherNet/IP Originator
| Specification |
Description |
| Class 1 Cyclic Connections Supported |
Yes |
| Class 3 / UCMM Connections Supported |
Yes |
| Class 1 Connection Count |
10 |
| Class 3 / UCMM Target Device Count |
10 |
| Class 3 / UCMM Mapping Count |
50 |
| Direct-To-Tag Logix Support |
Yes |
Matériel
| Specification |
Description |
| Dimensions (H x W x D) |
149.0 x 34.0 x 116.0 mm |
| Power Supply |
Input: 22 to 26 VDC |
| Power Consumption |
Maximum: 135 mA @ 24V => 3.3 W (No Bus Load) |
| Connector |
3-way terminal |
| Conductors |
24 to 18 AWG |
| Enclosure Rating |
IP20, NEMA/UL Open Type |
| Temperature |
-20 to 70°C (Power Conditioner Load <= 220 mA, Full Bus Load <= 200 mA) |
| Relative Humidity |
5% to 90% - No condensation |
| Earth Connection |
Yes, terminal based |
| Emissions |
IEC 61000-6-4 |
| ESD Immunity |
EN 61000-4-2 |
| Radiated RF Immunity |
IEC 61000-4-3 |
| EFT/B Immunity |
EFT: IEC 61000-4-4 |
| Surge Immunity |
Surge: IEC 61000-4-5 |
| Conducted RF Immunity |
IEC 61000-4-6 |
Certifications
| ODVA Certification | 37,47 kB | Dernière Modification 25/01/2024 |
| CE Declaration of Conformity (CE, UKCA, RoHS, UL) | 339,65 kB | Dernière Modification 26/01/2024 |
| UL/cUL; Class1, Div 2 | 238,99 kB | Dernière Modification 25/01/2024 |