PROSOFT
CONFIGURATION BUILDER README
ProSoft Configuration Builder
4.8.0.018
README File
This README file contains information you should know before
you install or upgrade to ProSoft Configuration
Builder 4.8.0.018.
This file also contains information that may not be available in other ProSoft documentation. Visit ProSoft Technology
for the most current information about the ProSoft Configuration Builder.
IMPORTANT
NOTE
Forward
Compatibility:
Always back up any PPF files before editing them with a new
version of PCB. In some cases, PPF files edited and saved with newer versions
of PCB may no longer be compatible with older versions of PCB.
The latest version of PCB is always the recommended platform for the latest
functionality support. The current PCB Version is 4.8.0.018.
If upgrading from
very old versions of PCB v2.0.2 or earlier:
For the PTQ-PDPMV1 module: The .XSY and .XFM files used by
Unity Pro, generated and exported by ProSoft Configuration Builder versions
2.0.7 and newer, are NOT
COMPATIBLE or INTERCHANGEABLE with earlier versions of .XSY and
.XFM files generated by PCB versions 2.02, or earlier. The newer .XSY and .XFM
files contain new Unity Pro data types, function blocks, and data structures
that did not exist in the older versions of these files, created by older
versions of PCB (please see PCB Version 2.0.7
for specific details).
If upgrading from a PCB version older than v2.0.2, please be sure to verify
your PROFIBUS configuration and re-export the Unity Pro .XSY and .XFM processor
files and upgrade your Unity Pro project, to be sure you are using the latest
enhanced versions of these files.
Compatible
Operating Systems
System requirements in this document are subject to change
and do not represent a commitment to support any particular software or
hardware.
·
Windows 11
·
Windows 10 Pro x64
NOTE: To
use PCB with older Windows operating systems, you must be sure to install PCB
using the "Run as Administrator" option. To find this option,
right-click on the Setup.exe installer program icon. In the context menu, you
will see the "Run as Administrator" option. Left-click to use this
install option. Be aware, you must install using this option even if you are
already logged in as an Administrator on your network or personal computer
(PC). Using the "Run as Administrator" option will allow the PCB
installer to create folders and files on your PC with proper permissions and
security. If you do not use the "Run as Administrator" option, PCB
may appear to install correctly; but you will receive numerous, repeating file
access errors whenever PCB is running, especially when changing configuration
screens. If this happens, to eliminate the errors, you will have to completely
uninstall PCB and then re-install using the "Run as Administrator"
option.
Table
of Contents
Upgrade
Information for PCB Version 4.8.0.018 (February 2024)
Known
Anomalies:
1. Possible issues with earlier versions of Windows
XP and the installation of ProSoft Configuration Manager. If installing ProSoft
Configuration Builder in a Win XP OS, make sure the OS is updated with the
latest Service Packs and .NET Framework.
Detailed Reason(s) For Change
The following changes were
implemented for PCB v4.8.0.018 :
(February 2024):
1. Support for M_BO_TB (ASDU 33) is added in
PLX32-MBTCP-104. Now upto 100 M_BO_TB points can be
configured in PCB.
2. Data Conversion functionality is added in
PLX32-MBTCP-104. Data can be converted from Int to
Float or Float to Int according to requirement.
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
PLX32-MBTCP-104
|
1.005.019
|
4.8.0.018
|
New
Feature(s)
The following features were implemented for ProSoft Configuration Builder version 4.8.0.018.
1.
Data conversion feature has been introduced for the
PLX32-MBTCP-104, Selecting new parameters: "Int
to Float" or "Float to Int" conversion
method data will be converted, user can also select operation like multiply,
divide, subtraction and addition according to requirement.
2.
M_BO_TB (ASDU 33) support is added.
Previously Released Versions of ProSoft Configuration
Builder
ProSoft Configuration Builder
version 4.8.0.009(December
2023)
Detailed Reason(s)
For Change
The following changes were
implemented for PCB
v4.8.0.009: (December 2023):
3. The server port range has been extended to
65535, expanding it from the previous limit of 41950 for PLX31-EIP-MBTCP,
PLX32-EIP-MBTCP and PLX32-EIP-MBTCP-UA modules.
|
#
|
Module Name
|
Previous Range
|
Current Range
|
|
1
|
PLX31-EIP-MBTCP
|
1 to 41950
|
1 to 65535
|
|
2
|
PLX32-EIP-MBTCP
|
1 to 41950
|
1 to 65535
|
|
3
|
PLX32-EIP-MBTCP-UA
|
1 to 41950
|
1 to 65535
|
4. A more detailed definition of the Command
Control Register has been provided across all MBTCP gateways for MBTCP
client commands.
5. Implement robust and distinct error handling
procedures to address the absence of a response from connected devices within
the Ethernet connection, encompassing both gateways and chassis modules.
6. The 28800 baud rate has been removed from all
PLX3x and MVI69 series devices that communicate via serial connections. The
modules are:
· PLX31-EIP-ASCII
· PLX31-EIP-ASCII4
· PLX31-EIP-MBS
· PLX31-EIP-MBS4
· PLX31-MBTCP-MBS
· PLX31-MBTCP-MBS4
· PLX31-PND-MBS
· PLX31-PND-MBS4
· MVI69E-MBS
· MVI69L-MBS
· MVI69E-GSC
7. MBTCP client commands comment field can have up
to 32 characters, expanding it from previous limit of 10 characters for
MVI69E-MBTCP.
8. Implemented a range check for internal addresses
in MNET commands, dependent on the function code.
|
#
|
Function Code
|
Previous Range
|
Current Range
|
|
1
|
3,4,6
and 16
|
0 to 79999
|
0 to 4999
|
|
2
|
1,2,5
and 15
|
0 to 79999
|
0 to 79999
|
9. We can now upload the wattcp.cfg
file for MV69-MNET with successful results.
10. Users can now input deadband
values below 1 for M_ME_NA, M_ME_NB and M_ME_NC parameters of PLX32-EIP-104.
11. EIP Class 3 commands now work properly for the
PLX82-EIP-PNC.
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
All
Units
|
All Versions
|
4.8.0.009
|
New Feature(s)
The following features were
implemented for ProSoft Configuration Builder version 4.8.0.009.
3.
A Watchdog feature has been introduced for the
PLX82-EIP-PNC, incorporating two new parameters: "Watchdog Timeout"
and "Watchdog Reset Value".
4.
The
Reg count range has been extended to 2000, expanding
it from the previous limit of 800 for all MBTCP and MBS supporting PLX3x and
MVI69 modules.
|
#
|
Module Name
|
Previous Range
|
Current Range
|
|
1
|
PLX31-EIP-MBTCP
|
1 to 800
|
1 to 2000
|
|
2
|
PLX32-EIP-MBTCP
|
1 to 800
|
1 to 2000
|
|
3
|
PLX32-EIP-MBTCP-UA
|
1 to 800
|
1 to 2000
|
|
4
|
PLX31-MBTCP-PND
|
1 to 800
|
1 to 2000
|
|
5
|
PLX32-MBTCP-PND
|
1 to 800
|
1 to 2000
|
|
6
|
PLX31-MBTCP-SIE
|
1 to 800
|
1 to 2000
|
|
7
|
PLX32-MBTCP-SIE
|
1 to 800
|
1 to 2000
|
|
8
|
PLX32-MBTCP-104
|
1 to 800
|
1 to 2000
|
|
9
|
PLX31-MBTCP-MBS
|
1 to 800
|
1 to 2000
|
|
10
|
PLX31-MBTCP-MBS4
|
1 to 800
|
1 to 2000
|
|
11
|
PLX31-EIP-MBS
|
1 to 800
|
1 to 2000
|
|
12
|
PLX31-EIP-MBS4
|
1 to 800
|
1 to 2000
|
|
13
|
PLX31-PND-MBS
|
1 to 800
|
1 to 2000
|
|
14
|
PLX31-PND-MBS4
|
1 to 800
|
1 to 2000
|
|
15
|
MVI69E-MBTCP
|
1 to 800
|
1 to 2000
|
|
16
|
MVI69E-MBS
|
1 to 800
|
1 to 2000
|
5.
The
Address range has been extended to 65535, expanding it from the previous limit
of 32767 for SIE clients of PLX3x gateways.
|
#
|
Module Name
|
Previous Range
|
Current Range
|
|
1
|
PLX31-EIP-SIE
|
1 to 32767
|
1 to 65535
|
|
2
|
PLX32-EIP-SIE
|
1 to 32767
|
1 to 65535
|
|
3
|
PLX31-MBTCP-SIE
|
1 to 32767
|
1 to 65535
|
|
4
|
PLX32-MBTCP-SIE
|
1 to 32767
|
1 to 65535
|
6.
Included details on port number, format, tick
timings, and port configuration in Data Analyzer for
PLX31-EIP-MBS, PLX32-EIP-MBS4, PLX31-EIP-ASCII and PLX32-EIP-ASCII4.
7.
Users can now back up the PROFINET device name
on an SD card for the following modules:
·
PLX31-PND-MBS
·
PLX31-PND-MBS4
·
PLX32-EIP-PND
·
PLX31-MBTCP-PND
·
PLX32-MBTCP-PND
ProSoft Configuration Builder version 4.7.0.002(July
2022)
Detailed Reason(s)
For Change
The following changes were implemented for PCB v4.7.0.002: (July
2022):
1.
Copyright year is updated on the PCB Help/About screen for this version.
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
All
Units
|
All Versions
|
4.7.0.002
|
New Feature(s)
There are no new features implemented for ProSoft
Configuration Builder version 4.7.0.002
ProSoft Configuration Builder
Version 4.7.0.001(June 2022)
Detailed Reason(s)
For Change
The following changes were implemented for PCB
v4.7.0.001: (June 2022):
1.
The parameter range for the Error/Status Pointer has been modified
for MVI69E-MBTCP and MVI69L-MBTCP modules. Below are the new applicable ranges.
|
#
|
Module Name
|
Previous Range
|
Current Range
|
|
1
|
MVI69E-MBTCP
|
-1 to 9955
|
-1 to 9992
|
|
2
|
MVI69L-MBTCP
|
-1 to 435
|
-1 to 232
|
2. If a user is trying to
Upload/Download a file from module to PC or vice-versa and the same Subnet does
not exist in the network configuration of the user, A warning message “Module
cannot be selected, Please create a module temporary IP address within the same
subnet as your PC” will be displayed.
3. For the MVI56E- 61850S,
In the Diagnostic Setup screen, now the User will be able to open the drop
list under the Select Communication Type
option as (1756 ENBT/Ethernet)
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
All
Units
|
All Versions
|
4.7.0.001
|
|
MVI69L-MBTCP
|
All Versions
|
4.7.0.001
|
|
MVI69E-MBTCP
|
All Versions
|
4.7.0.001
|
|
MVI56E-61850S
|
All Versions
|
4.7.0.001
|
New Feature(s)
The following features were implemented for ProSoft
Configuration Builder version 4.7.0.001.
1. Added
new parameter Command Control Register Function to Modbus TCP Client Driver for
below modules:
·
PLX31-EIP-MBTCP
·
PLX31-MBTCP-MBS
·
PLX31-MBTCP-MBS4
·
PLX31-MBTCP-PND
·
PLX31-MBTCP-SIE
·
PLX32-MBTCP-PND
·
PLX32-MBTCP-104
·
PLX32-MBTCP-SIE
·
PLX32-EIP-MBTCP-UA
·
PLX32-EIP-MBTCP
2. For PLX31-EIP-PND, A new parameter “Profinet
Device Name” is added in PND Section for PCB Configuration. By this, the
PROFINET Device name provided in the Siemens TIA tool will be uploaded to the
PCB Configuration file and vice-versa.
ProSoft Configuration Builder
Version 4.6.0.007 (January 2022)
Detailed Reason(s)
For Change
The following changes were implemented for PCB v4.6.0.007:
(January 2022):
1. Corrected issue: The user is
prompted to select a module if he toggles the upload/download button while a
module is not selected.
2.
Corrected
issue: If the name of a module was changed from the configuration section, the
user was not able to download the configuration for that module.
3.
Corrected
issue: If the TSAP value is negative in the SIE command for the non-S7-200
command, the Invalid Configuration Error is not thrown.
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
All
Units
|
All Versions
|
4.6.0.007
|
|
PLX32-EIP-MBTCP
|
All Versions
|
4.6.0.007
|
|
All
PLX3x-SIE Units
|
All Versions
|
4.6.0.007
|
New Feature(s)
The following features were implemented for ProSoft
Configuration Builder version 4.7.0.001.
1. For PLX32-EIP-MBTCP, it is configurable from PCB to enable
or disable the remote access.
ProSoft Configuration Builder
Version 4.6.0.002 (September 2021)
Detailed Reason(s)
For Change
The following changes were implemented for PCB v4.6.0.002:
(September 2021):
1.
Corrected issue: For the
MVI56-104S, PCB shows configurations for the N_BO_NA data types when it should
not.
2.
Corrected issue: Reloading exported
configuration file to project throws
error and does not rename target module.
3.
Corrected issue: New IP Address did not download to 5204SE-MNET-PDPMV1.
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
MVI56-104S
|
All Versions
|
4.6.0.002
|
|
5204SE-MNET-PDPPMV1
|
All Versions
|
4.6.0.002
|
New Feature(s)
No new features were implemented for ProSoft Configuration
Builder version 4.6.0.002
ProSoft Configuration Builder
Version 4.6.0.001 (August 2021)
Detailed Reason(s)
For Change
The following changes were implemented for PCB v4.6.0.001:
(August 2021):
1.
Increase Max Number of
E/IP Class 1 Connections to 8 (PLX3-45) (CLONE: PLX3-157, PLX3-85 to PLX3-92)
2.
Corrected issue:
Unrealistic 65K limit for Internal Addresses on module with 10K database.
(MV69-119)
3.
Corrected issue: When
trying to convert old 5201-DFNT-104S
configurations to PLX32-EIP-104, PCB crashes and shuts down (ISW-319)
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
5201-DFNT-104S
|
All Versions
|
4.6.0.001
|
|
PLX30
(All)
|
All Versions
|
4.6.0.001
|
|
MVI69E-MBS
|
All Versions
|
4.6.0.001
|
|
MVI69E-MBTCP
|
All Versions
|
4.6.0.001
|
|
MVI56E-MNET
|
All Versions
|
4.6.0.001
|
|
MVI56E-MNETC
|
All Versions
|
4.6.0.001
|
New Feature(s)
No new features were implemented for ProSoft Configuration
Builder version 4.6.0.001
ProSoft Configuration Builder Version 4.6.0.0 (June 2020)
Detailed Reason(s)
For Change
The following changes were
implemented for PCB
v4.6.0.0: (June 2021):
1.
Addition of new module
MVI56E-SMGC
2.
Addition of new module
MVI56-SMGC
3.
Enhancement: Backward compatibility
to support conversion of legacy module (MVI56-SMGC) to enhanced module
(MVI56E-SMGC).
4.
Corrected issue:
Unrealistic 65K limit for Internal Addresses on module with 10K database.
5.
Corrected issue: PSW-PCB
- ProSoft Configuration Builder not working as it should.
6.
Corrected issue: BUG: Auto Convert from
5201-DFNT-104S to PLX32-EIP-104 is not working correctly for the IP conversion
7.
Corrected issue: Typo found in device overview.
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
MVI56E-SMGC
|
All Versions
|
4.6.0.0
|
|
MVI56-SMGC
|
All Versions
|
4.6.0.0
|
|
PLX30
(All)
|
All Versions
|
4.6.0.0
|
|
MVI69E-MBS
|
All Versions
|
4.6.0.0
|
|
MVI69E-MBTCP
|
All Versions
|
4.6.0.0
|
|
MVI56E-MNET
|
All Versions
|
4.6.0.0
|
|
MVI56E-MNETC
|
All Versions
|
4.6.0.0
|
|
PLX32-EIP-104
|
All Versions
|
4.6.0.0
|
New Feature(s)
No new features were implemented for ProSoft Configuration
Builder version 4.6.0.0
ProSoft Configuration Builder Version 4.5.002.0 (October
2020)
Detailed Reason(s)
For Change
The following changes were implemented for PCB v4.5.002.0:
(October 2020):
1. Corrected issue: Conversion from 5201 to PLX32
does not bring over IP settings.
2. Corrected issue: Fixed the issue of
5507-HART-PDPS .cfg file is incorrect (missing part
of Fixed Data).
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
PLX32-EIP-104
|
All Versions
|
4.5.002.0
|
|
PLX32-MBTCP-104
|
All Versions
|
4.5.002.0
|
New Feature(s)
No new features were implemented for ProSoft Configuration
Builder version 4.5.002.0
ProSoft Configuration Builder Version 4.5.001.0 (September
2020)
Detailed Reason(s)
For Change
The following changes were implemented for PCB v4.5.001.0:
(September 2020):
1. Corrected issue: Fixed the issue of Module
Definitions missing from at least half of the supported modules.
2. Corrected issue: Fixed the issue of
5507-HART-PDPS .cfg file is incorrect (missing part
of Fixed Data).
3. Corrected issue: Fixed the issue of Mapping a PLX32-EIP-SIE command shows error
regarding IP address set.
4. Corrected issue: Fixed the issue of PCB where
my_ip_1 changed to default after upload from module.
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
All Units
|
All Versions
|
4.5.001.0
|
|
5507-HART-PDPS
|
All Versions
|
4.5.001.0
|
|
PLX32-EIP-SIE
|
All Versions
|
4.5.001.0
|
|
MVI56E-FLN
|
All Versions
|
4.5.001.0
|
New Feature(s)
No new features were implemented for ProSoft Configuration
Builder version 4.5.001.0
ProSoft Configuration Builder Version 4.5.0.0 (August 2020)
Detailed Reason(s)
For Change
The following changes were implemented for PCB v4.5.0.0: (August
2020):
1. Addition support of module PLX32-EIP-104.
2.
Addition support of
module PLX32-MBTCP-104.
3.
Enhancement: Database
update to support 10,000 Database addresses.
4.
Enhancement: Backward compatibility
to support conversion of legacy module (5201-DFNT-104S) to enhanced module
(PLX32-EIP-104).
5.
Enhancement: Backward
compatibility to support conversion of legacy module (5201-MNET-104S) to
enhanced module (PLX32-MBTCP-104).
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
All Units
|
All Versions
|
4.5.0.0
|
|
5201-DFNT-104S
|
All Versions
|
4.5.0.0
|
|
5201-MNET-104S
|
All Versions
|
4.5.0.0
|
|
PLX32-EIP-104
|
All Versions
|
4.5.0.0
|
|
PLX32-MBTCP-104
|
All Versions
|
4.5.0.0
|
New Feature(s)
The following new feature was implemented for ProSoft
Configuration Builder version 4.5.0.0
1. Implementation
of new UI for Ethernet Configuration for PLX32-EIP-104 and PLX32-MBTCP-104.
2. Implementation
of “Number of ports” selection feature for PLX32-EIP-104 and PLX32-MBTCP-104.
ProSoft Configuration Builder Version 4.4.24.24 (May 2020)
Detailed Reason(s)
For Change
The following changes were implemented for PCB v4.4.24.24: (May
2020):
1.
Corrected issue: Fixed the
issue of no GUI indication for the dialog boxes that resizable. Added a gripper
in the bottom right corner.
2. Corrected issue: Fixed the delete confirmation
Message box when any module is being deleted.
3. Corrected issue: Fixed the issue of the range of internal address for different
Modbus Function value in MVI56E-MNETC. Corrected issue: Fixed the issue of data
flashing to zero when counts under 60 (AOI issue).
4. Corrected issue: Fixed assigning temporary IP
Address in ProSoft Discovery Service.
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
All Units
|
All Versions
|
4.4.24.24
|
|
MVI56E-MNETC
|
All Versions
|
4.4.24.24
|
New Feature(s)
No new features were implemented for ProSoft Configuration
Builder version 4.4.24.24
ProSoft Configuration Builder Version 4.4.24.23 (March 2020)
The following changes were implemented for PCB v4.4.24.23:
(March 2020):
1. Corrected issue: Fixed the uploading issues when
uploading from a different PLX82-EIP/MBTCP-PNC module to a new project that has
a PLX82-EIP/MBTCP-PNC module already pre-configured.
2. Corrected issue: Fixed PCB download/upload issue
over high-latency networks
3. Corrected issue: Fixed the issue of PCB keeps existing PROFIBUS DP configuration for
the MVI56-PDPMV1, PTQ-PDPMV1, MVI69-PDPMV1.
4. Corrected issue: Fixed the issue when upload is
performed on a module, it prompts for save as dialogue, saving the new uploaded
project overwrites the old project file.
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
All Units
|
All Versions
|
4.4.24.23
|
|
ALL PDPMV1 platform units
|
All Versions
|
4.4.24.23
|
|
ALL PNC platform units
|
All Versions
|
4.4.24.23
|
New Feature(s)
No new features were implemented for ProSoft Configuration Builder
version 4.4.24.23
ProSoft Configuration Builder
Version 4.4.24.22 (March 2020)
Detailed Reason(s) For Change
The following changes were implemented for PCB v4.4.24.22: (March
2020):
1.
Enhancement: Added
support for the MVI56E-GEC product. It supports the conversion between
MVI56-GEC and MVI56E-GEC.
2.
Enhancement: Added
support for the MVI69E-GEC product. It supports the conversion between
MVI69-GEC and MVI69E-GEC.
3.
Enhancement: Added support
for the MVI69E-GSC product. It supports the conversion between MVI69-GSC and
MVI69E-GSC.
4.
Enhancement: Added
Legacy support to MVI69E-MBS. It allows user to convert their existing
MVI69-MCM product configuration from Legacy to the new MVI69E-MBS Enhanced
product.
5.
Enhancement: Added
Legacy support to MVI69E-MBTCP. It allows user to convert their existing
MVI69-MNET product configuration from Legacy to the new MVI69E-MBTCP Enhanced
product.
6.
Enhancement: Added field
“Mode: Legacy” when MVI69E-MBS and MVI69E-MBTCP are configured in Legacy mode.
7.
Enhancement: Improved
filtering in the module selection dialogue .
8.
Corrected issue: Fixed
Download issue with 5204-DFNT-PDPMV1.
9.
Corrected issue: Fixed
the issue if user has a module selected and clicks 'New' file but selects
'Cancel', module select window still appears.
10.
Corrected issue: Fixed
the issue If TSAP value is empty in the SIE command for non-S7-200 command
reports -45 error.
11.
Corrected issue: Fixed
the issue of PCB not reporting subnet warnings for the PLX32 Series Gateways if
the User makes the mistake of setting both ETH ports on the same IP Subnet.
12.
Corrected issue: Set the
limit of 80 characters for module name.
13.
Corrected issue: Added
the warning if server port value is configured as 80 for MVI56E-GEC and
MVI69E-GEC modules.
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
All Units
|
All Versions
|
4.4.24.22
|
|
5204-DFNT-PDPMV1
|
All Versions
|
4.4.24.22
|
|
ALL PLX32 platform units
|
All Versions
|
4.4.24.22
|
|
MVI56E-GEC
|
All Versions
|
4.4.24.22
|
|
MVI69E-GEC
|
All Versions
|
4.4.24.22
|
|
MVI69E-MBS
|
1.10.021
|
4.4.24.22
|
|
MVI69E-MBTCP
|
1.10.007
|
4.4.24.22
|
New Feature(s)
No new features were implemented for ProSoft Configuration Builder
version 4.4.24.22
ProSoft Configuration Builder Version 4.4.24.10 (October
2019)
Detailed Reason(s) For Change
The following changes were implemented for PCB v4.4.24.10:
(October 2019):
1.
Corrected issue: Issue when creating Multiple PLX82-EIP/MBTCP-PNC
modules in the same project. PCB now creates individual fdt
project files with an ending suffix value
2.
Corrected issue: PCB downloads correct wattcp.cfg
file to MVI56E modules
3.
Corrected issue: Fixed download issue with MVI69-DFCM
4.
Corrected issue: Fixed MVI69x-MBTCP Function Code 5 command bit
write in Pass-Through Mode
5.
Corrected issue: Fixed incorrect description in Message Box for
PROFINET modules
6.
Corrected issue: Adding a Project by Right-click deletes and/or
closes entire project file
7.
Corrected issue: Internal address range for SIE protocol was
changed
8.
Change to database: PCB missing setting for Modbus Pass-Through
(PLX31-MBTCP-MBS)
9.
Change to database: Updated PCB parameter definition for SIE
protocol modules regarding the TSAP value for non-S7-200 commands
10. Change to database:
Fixed database description for MVI56E-MNETC
11. Change to database:
Fixed database Slave Address definition for most Modbus TCP/IP devices
12. Change to database:
Fixed database configuration for PLX82-EIP-PNC Class3 Commands
13. Change to database:
Fixed database configuration for SIE Client commands - Command Error Delay Upper
Limit
14. Change to database:
Fixed database coil address limit for the MVI69E-MBTCP
15. Enhancement: Added
Module descriptions to PCB for more products
16. Enhancement: Improved
PCB creation of controller tags, by removing hyphens from the module name which
are consider invalid by RSLogix
17. Enhancement: Extended
the maximum register count for SIE commands from 122 to 222, allowing for
SIEMENS processor upper limit
Module(s) Affected
|
Module
|
Module Firmware Version
|
PCB Version
|
|
All units
|
All versions
|
4.4.24
|
|
PLX31-MBTCP-MBS
|
1.04.008
|
4.4.24
|
|
MVI69-DFCM
|
1.70
|
4.4.24
|
|
PLX31-MBTCP-MBS
|
1.04.003
|
4.4.24
|
|
PLX31-EIP-SIE
|
1.04.003
|
4.4.24
|
MVI69x-MBTCP/MBS AOI Upgrade
|
Module
|
AOI Version
|
PCB Version
|
|
MVI69x-MBTCP
|
1.4
|
4.4.24
|
|
MVI69x-MBS
|
1.3
|
4.4.24
|
New Feature(s)
The following new feature was implemented for ProSoft Configuration
Builder version 4.4.24
- Implemented new configuration
parameters for the PLX31-MBTCP-MBS PassThrough
functionality
ProSoft
Configuration Builder Version 4.4.23 (January 2019)
The
following changes were implemented for ProSoft Configuration Builder version
4.4.23 (January 2019):
1.
Corrected issue: Upload
of module's configuration is identified in PCB as incorrect module type .
2.
Corrected issue:
Clicking on Configure deletes path and/or deletes Profibus
configuration for the 5204-DFNT-PDPMV1 unit .
3.
Corrected issue: User is
no longer required to run the PCB Installation as Administrator.