The ProLinx EtherNet/IP to DNP over Ethernet Gateway creates a powerful connection between devices on EtherNet/IP and DNP over Ethernet networks. This stand-alone DIN-rail mounted protocol gateway provides one Ethernet port.
The EtherNet/IP protocol driver supports the Explicit Messaging implementation of the protocol. User-configurable as both a Client and a Server, the EtherNet/IP port is a very powerful data transfer tool.
The ProLinx module supports the DNP 3.0 protocol as a server using the TCP and UDP protocols using service port 20000. This port is fully configurable.
The DFNT-DNPSNET gateways are the ideal solution for joining EtherNet/IP and DNP over Ethernet networks. This Ethernet to Ethernet gateway is designed with DFNT Client and Server support and DNP over Ethernet server support, enabling connections between the dissimilar network types. The gateway utilizes a shared database so that the two protocols can quickly transfer data between themselves. Applications for the gateway are found in most industries, especially Manufacturing, Oil and Gas, Electrical Power and Food Processing. EtherNet/IP (Explicit Messaging) Compatible Devices Rockwell Automation equipment that supports EPIC:
The DFNT-DNPSNET modules are the ideal solution for joining EtherNet/IP and DNP over Ethernet networks. This Ethernet to Ethernet gateway is a powerful module designed with both Client and Server support for each protocol, enabling easy connections between the dissimilar network types. The module utilizes a shared database so that the two protocols can quickly and easily transfer data between themselves. Applications for the module are found in most industries, especially Manufacturing, Oil and Gas, Electrical Power and Food Processing.
The ProLinx module contains an internal database that consists of areas for application data, status information, and configuration information.
The internal database is shared between all ports on the module and is used as a conduit to pass information from a device on one network to one or more devices on another network.
The data area is used to store and retrieve data by the protocol drivers and for data exchange between protocols. The database is used as a source for write commands to remote devices and holds data collected from the remote devices. Commands defined in the configuration file (stored in the configuration data area) control how the data is to be handled in the database.
This area is used to store error codes, counters, and port status information for each port.
This area contains module configuration information such as port configuration, network information, and command configuration. This configuration file is downloaded to, or uploaded from, this area.
Specification |
Description |
Power Supply |
24 VDC nominal |
Current Load |
500 mA max @ 32 VDC max |
Operating Temperature |
-4° F to 122° F (-20° C to 50° C) |
Storage Temperature |
-40° F to 185° F (-40° C to 85° C) |
Relative Humidity |
5% to 95% (with no condensation ) |
Dimensions |
Standard: |
LED Indicators |
Power and Module Status |
Configuration Serial Port |
DB-9M RS-232 only |
Ethernet Port (Ethernet modules only) |
10Base-T half duplex RJ45 Connector |
Application Ports |
Modbus Plus Connector |
Serial Port Isolation |
2500 V RMS port signal isolation per UL 1577 |
Shipped with Each Unit |
Mini-DIN to DB-9M serial cables |
ProSoft Configuration Builder (PCB) | ||
LifeCycle Letter 5201-DFNT-DNPSNET | 125,84 kB | Dernière Modification 03/11/2020 |
DFNT DNPSNET Datasheet | 81,86 kB | Dernière Modification 26/04/2010 |
DFNT Protocol Manual | 2,03 MB | Dernière Modification 24/07/2013 |
DNPSNET Protocol Manual | 1,03 MB | Dernière Modification 27/04/2015 |
PLX EDS File 52xx-53xx | 333,95 kB | Dernière Modification 19/11/2020 |
The EtherNet/IP protocol driver supports the Explicit Messaging implementation of the protocol. User-configurable as both a Client and a Server, the EtherNet/IP port is a very powerful data transfer tool.
The EtherNet/IP protocol is one of the primary connectivity tools to the different Rockwell Automation platforms. The Explicit Messaging aspect of the protocol (only) has been implemented in the ProLinx units to provide the data transfer link between the ProLinx units and the Rockwell Automation hardware.
General Protocol Information |
|
Messaging |
PCCC on CIP |
Miscellaneous |
125 word read and write data lengths |
EtherNet/IP Server Specifications
In Server mode, the module accepts commands from one or more clients to read/write data stored in the module's internal registers.
EtherNet/IP Server Specifications |
|
Connections |
Five independent TCP server sockets permit remote clients to interact with all data contained in the module. |
Data File |
Data Table File Start - Fixed at N10 |
CIP Services Supported |
0x4C - CIP Data Table Read |
EtherNet/IP Client Specifications
In Client mode, the module controls the read/write data transfer between the gateway and other EtherNet/IP devices. Data transfer can be initiated and executed without any ladder programming being required in the Rockwell Automation hardware.
EtherNet/IP Client Specifications |
|
General |
One client |
Command List |
Support for 100 commands, each configurable for command, IP address, register to/from addressing and word/bit count. |
Polling of command list |
User configurable polling of commands, including disabled, continuous and on change of data (write only). |
List of Rockwell Automation material that support EPIC:
The ProLinx module supports the DNP 3.0 protocol as a server using the TCP and UDP protocols using service port 20000. This port is fully configurable.
The DNPSNET protocol driver exists as a single service port (DNPSNET port 20000) implementation that supports a single TCP port connection and multiple UDP ports on a TCP/IP Ethernet network. The DNPSNET port operates as a server, supporting the DNP 3.0 protocol in a Level 2 implementation using the DNP User Group recommended extension for use on LAN/WAN.
General Parameters |
|
Internal Database |
Binary Inputs: 8000 points (500 words) Analog Inputs: 500 points Counters: 250 (500 words) Binary Outputs: 2000 points (125 words) Analog Outputs: 500 points |
DNP Mode |
DNP 3.0 Slave - Level 2 |
DNP Server |
|
Service Port |
20000 |
Protocols |
TCP (1 connection) and UDP |
Node address |
0 to 65534 (software selectable) |
The DNPSNET module accepts DNP commands to control and monitor the data stored in the DNP databases. These data are passed between the module and the other protocol on the ProLinx module.
CB Safety | 35,78 kB | Dernière Modification 27/04/2022 |
Korean KC Registration | 807,00 kB | Dernière Modification 13/03/2020 |
Country Approval - Eurasian Customs Union Conformity (EAC) (Wired) | 1,92 MB | Dernière Modification 10/07/2020 |
UL/cUL; Class 1, Div 2 | 1,08 MB | Dernière Modification 31/03/2020 |
UL/cUL; Class 1, Div 2 (Canada) | 1,10 MB | Dernière Modification 02/07/2013 |