Modbus Slave Network Interface Adapter for FLEX I/O
3170-MBS
The MVI94 Modbus Slave Network Interface Adapter can interface up to 8 Rockwell Automation FLEX and/or Integra I/O modules directly with any Modbus Master.
Caractéristiques Avantages
The 3170-MBS module is simple to use, requiring only the setting of several dip-switch options. The Flex and Integra module data images are pre-mapped into Modbus addresses to simplify reading and writing using standard Modbus commands. Each product is shipped with a User Manual detailing its installation and operation.
Applications
The 3170-MBS module provides highly configurable Slave capabilities to the Rockwell Automation FLEX and/or Integra platform. The product is frequently used in two general applications, SCADA Slave or as a foreign device interface master. In a SCADA Slave application the module could be used in remote controller racks as is often used in the oil and gas, or wastewater industries.
Matériel
| Specification | Description |
| Form Factor |
Single Slot 1794 Backplane compatible |
| Backplane current load | 20 mA @ 5 VDC |
| External power supply | 12 VDC to 24 VDC 340 mA to 170 mA |
| Operating temperature | 32° F to 131° F (0° C to 55° C) |
| Storage temperature | -40° F to 185° F (-40° C to 85° C) |
| Shock |
30 g operational |
| Vibration | 5 g from 10 to 150 Hz |
| Relative humidity | 5% to 95% (without condensation) |
| LED indicators |
Module status |
| Configuration Serial port (PRT1) |
Mini-DIN |
| Application serial Port (PRT2) |
Mini-DIN |
| Dimensions (with Module installed in Base) |
Height x Width x Depth |
Téléchargements
| 3170-MBS Datasheet | 90,20 kB | Dernière Modification 27/04/2010 |
| 3170 MBS User Manual | 1,11 MB | Dernière Modification 14/03/2012 |
| 3170-MBS Installation Guide | 94,26 kB | Dernière Modification 30/04/2010 |