802.11g High Power Industrial Hotspot RLX2 (FCC)
RLX2-IHG-A
The ProSoft Technology 802.11g High Power Industrial Hotspot™ (RLX2-IHG) is a high-speed wireless Ethernet radio for applications up to 10 mi. / 16 km. The RLX2-IHG uses the 2.4 GHz band and supports a data rate up to 54Mbps. The Hotspot supports Access Point, Repeater, Bridging, and Client modes. The RLX2-IHG offers fast roaming, hazardous location certifications, as well as vibration and shock resistance.
The included IH Browser configuration and monitoring software allows the user to view network topology, assign IP addresses, monitor network diagnostics, and update radio firmware.
Images
|
Caractéristiques Avantages
- EtherNet/IP™- or Modbus®-based PLCs/PACs can use message instructions to read diagnostic information from the radios, helping to reduce down time when troubleshooting wireless network problems.
- 802.11i, WPA-2 Personal/Enterprise using 128-bit AES encryption ensures secure networking
- RADIUS security ensures secure networking with advanced authentication and encryption
- Virtual Local Area Networks (VLAN) allow for secure network segmentation
- Network Address Translation (NAT) lets machine builders deploy many machines without needing to change IP addresses every time.
- Quality of Service (QoS) provides data prioritization for I/O control devices, video data, etc.
- Ultra-Fast Roaming (under 10ms) maintains seamless, high-speed connections to one or more devices on moving equipment and machines (such as cranes, AGVs, and carriers) as they travel between Access Points
- IGMP Snooping & Packet Filtering optimizes UDP multicast traffic for superior EtherNet/IP I/O communications
- Supports the ability to communicate with multiple Ethernet devices when used with existing third-party wireless infrastructures
- Supports Power over Ethernet (PoE) to reduce cabling costs
- Disaster recovery feature allows the radio configuration to be stored on a microSD card for quick field replacement
- Connect serial networks (Modbus, DNP 3, etc.) over 802.11 wireless networks
- Simple local and remote configuration, monitoring, and wireless network diagnostics via IH Browser utility or SNMP
Spécifications
Radio
|
Frequency Band |
802.11g: |
| Wireless Standards |
802.11b, 802.11g, 802.11i |
|
Transmit Power (Programmable) |
Up to 24 dBm (250 mW) |
| Channel Data Rates (Modulation) |
802.11g: (OFDM) Mbps
802.11b: (DSS) Mbps |
| Receiver Sensitivity (Typical) |
-94 dBm @ 1 Mbps |
| Channel Selection |
802.11g: 1 to 11 (FCC), 1 to 13 (ETSI) |
| Security |
WPA2 Enterprise – 802.11i AES w/RADIUS [PEAP, TTLS, TLS, EAP] WPA2 Personal – 802.11i AES w/Passphrase Legacy WPA TKIP, WEP support, RADIUS |
| Network Features |
NAT, VLAN, QoS, IGMP Snooping |
Physical
| Enclosure |
Extruded aluminum with DIN and panel mount |
| Size |
14.8 x 11.8 x 3.8 cm (H x W x D) |
| Shock |
IEC 60068 2-27 (20 g, 3-Axis) |
| Vibration |
IEC 60068 2-6 (5G, 10 to 150Hz) |
| Ethernet Ports |
(1) 10/100/1000 Base-T, RJ45 connector |
| Serial Port |
(1) DB9 female (serial tunneling & encapsulation) |
| Antenna Port |
(1) RP-SMA connector |
| Weight |
1.1 lbs (499g) |
Environmental
| Operating Temperature |
40°C to +75°C (-40°F to +167°F) |
| Humidity |
Up to 100% RH, with no condensation |
| External Power Power over Ethernet |
10 VDC to 24 VDC 802.3af Compliant |
| Peak Power Consumption |
< 7W |
Matériel
| Enclosure |
Extruded aluminum with DIN and panel mount |
| Size |
14.8 x 11.8 x 3.8 cm (H x W x D), 5.82 x 4.64 x 1.48 in (H x W x D) |
| Shock |
IEC 60068 2-6 (20g, 3-Axis) |
| Vibration |
IEC 60068 2-27 (5g, 10Hz to 150Hz) |
| Ethernet Ports |
(1) 10/100/1000 Base-T, RJ45 connector |
| Serial Port |
(1) DB9 female (serial tunneling & encapsulation) |
| Antenna Ports |
(1) RP-SMA connector |
| Weight |
1.1 lbs (499g) |
| Environmental |
|
| Operating Temperature |
-40°C to +75°C (-40°F to +167°F) |
| Humidity |
Up to 100% RH, with no condensation |
| External PowerPoE (Power over Ethernet) |
10 VDC to 24 VDC 802.3af Compliant |
| Peak Power Consumption |
< 7W |
| Shipped with unit: |
(1) RLX2-IHG (802.11g High Power Industrial Hotspot) |
Certifications
| ATEX Letter of Conformity | 79,28 kB | Dernière Modification 12/05/2022 |
| CB Safety | 47,05 kB | Dernière Modification 14/03/2013 |
| UL/cUL; Class 1, Div 2 | 340,20 kB | Dernière Modification 14/09/2020 |
| Country Approval - Argentina | 96,03 kB | Dernière Modification 31/01/2019 |
| Country Approval - Australia | 30,79 kB | Dernière Modification 19/05/2014 |
| Country Approval - Brazil | 233,83 kB | Dernière Modification 04/12/2019 |
| Country Approval - Chile | 753,37 kB | Dernière Modification 17/12/2014 |
| Country Approval - China | 2,46 MB | Dernière Modification 01/03/2019 |
| Country Approval - India | 707,11 kB | Dernière Modification 02/07/2019 |
| Country Approval - Indonesia | 2,80 MB | Dernière Modification 31/01/2019 |
| Country Approval - Malaysia | 593,23 kB | Dernière Modification 17/12/2014 |
| Country Approval - Mexico | 59,78 kB | Dernière Modification 14/10/2019 |
| Country Approval - New Zealand | 34,81 kB | Dernière Modification 19/05/2014 |
| Country Approval - Singapore | 48,32 kB | Dernière Modification 19/02/2019 |
| Country Approval - United Arab Emirates | 61,93 kB | Dernière Modification 05/06/2020 |
| Declaration of Conformity (RoHS/CE) | 541,33 kB | Dernière Modification 18/12/2020 |
| Declaration of REACH Compliance | 340,36 kB | Dernière Modification 27/02/2024 |