Modbus Plus to PROFIBUS DPV1 Master Gateway
5304-MBP-PDPMV1
The ProLinx Modbus Plus to PROFIBUS DPV1 Master Gateway creates a powerful connection between devices on a Modbus Plus network and a PROFIBUS slave device. This stand-alone DIN-rail mounted protocol gateway provides one Modbus Plus configurable DB9F port and one PROFIBUS DPV1 Master configurable DB9F port.
The Modbus Plus protocol driver supports both Master and Slave implementations of the protocol on the DB9 Female Modbus Plus port. The Modbus Plus port is fully configurable.
The PROFIBUS DP Master protocol driver supports complete Master specifications according to IEC 61158 on either a Mono-Master or Multi-Master network. The module supports the DPV1 specification.
- Caractéristiques Avantages
- Applications
- Spécifications
- Matériel
- Téléchargements
- Protocoles
- Certifications
Caractéristiques Avantages
Applications
The MBP-PDPMV1 modules are the ideal solution for the many applications where Modbus Plus connectivity can be used to integrate a PROFIBUS DP slave device into a system. The Modbus Plus gateway is a powerful module designed with both Master and Slave support, enabling easy connection to other Modbus devices (Modicon processors and many others). In combination with the PROFIBUS DPV1 device support, the module provides a very powerful interface to the many PROFIBUS slave devices which are in use in the industrial marketplace today. Applications for the module are found in most industries, especially the Manufacturing, Oil and Gas, Electrical Power and Food Processing.
Applications
The MBP-PDPMV1 modules are the ideal solution for the many applications where Modbus Plus connectivity can be used to integrate a PROFIBUS DPV1 slave device into a system. The Modbus Plus gateway is a powerful module designed with both Master and Slave support, enabling easy connection to other Modbus Plus devices (Modicon processors and many others). In combination with the PROFIBUS DPV1 device support, the module provides a very powerful interface to the many PROFIBUS slave devices which are in use in the industrial marketplace today. Applications for the module are found in most industries, especially Manufacturing, Oil and Gas, Electrical Power and Food Processing.
Spécifications
Internal Database
The ProLinx module contains an internal database that consists of areas for application data, status information, and configuration information.
The internal database is shared between all ports on the module and is used as a conduit to pass information from a device on one network to one or more devices on another network.
Application Data Area
The data area is used to store and retrieve data by the protocol drivers and for data exchange between protocols. The database is used as a source for write commands to remote devices and holds data collected from the remote devices. Commands defined in the configuration file (stored in the configuration data area) control how the data is to be handled in the database.
Status Data Area
This area is used to store error codes, counters, and port status information for each port.
Configuration Data Area
This area contains module configuration information such as port configuration, network information, and command configuration. This configuration file is downloaded to, or uploaded from, this area.
Matériel
| Specification | Description |
| Power Supply |
24 VDC nominal |
| Current Load | 500 mA max @ 32 VDC max |
| Operating Temperature | -4° F to 122° F (-20° C to 50° C) |
| Storage Temperature | -40° F to 185° F (-40° C to 85° C) |
| Relative Humidity | 5% to 95% (with no condensation ) |
| Dimensions |
Standard: |
| LED Indicators |
Power and Module Status |
| Configuration Serial Port |
DB-9M RS-232 only |
| Ethernet Port (Ethernet modules only) |
10Base-T half duplex RJ45 Connector |
| Application Ports |
Modbus Plus Connector |
| Serial Port Isolation |
2500 V RMS port signal isolation per UL 1577 |
| Shipped with Each Unit |
Mini-DIN to DB-9M serial cables |
Téléchargements
| ProSoft Configuration Builder (PCB) | ||
| MBP PDPMV1 Datasheet | 259,14 kB | Dernière Modification 01/03/2012 |
| PROFIBUS comDTM Datasheet | 143,67 kB | Dernière Modification 11/03/2010 |
| MBP Protocol Manual | 715,75 kB | Dernière Modification 03/08/2017 |
| PDPMV1 Protocol Manual | 3,04 MB | Dernière Modification 08/02/2017 |
| PROFIBUS comDTM Quick Start Guide | 695,02 kB | Dernière Modification 12/05/2010 |
Protocoles
MBP Protocol Specification
The Modbus Plus protocol driver supports both Master and Slave implementations of the protocol on the DB9 Female Modbus Plus port. The Modbus Plus port is fully configurable.
Protocol Specifications
The Modbus Plus protocol driver exists in dual Modbus Plus Ports (MBP). The driver can be configured on an individual port basis as either a master or a slave to interface with other Modbus Plus devices.
| General Parameters |
|
| Modbus Function Codes |
3: Read Multiple Data Registers (MSTR 2) |
| Address Scope | 1 to 64 |
| Modbus Plus Functioning as a Master |
|
| Command List | Up to 200 commands on the master port, fully configurable for function, slave address, register to/from addressing and word count |
| Polling of command list | Configurable polling of command list, including continuous read or write commands and write on change of data (Function Code 16 Write command only)" |
| Modbus Plus Functioning as a Slave |
|
| Node address | 1 to 64 (software selectable) |
PDPMV1 Protocol Specification
The module supports complete Master specifications according to IEC 61158. Acyclic parameter data can be transferred with Class 1 or Class 2 DPV1 services, allowing processors to easily communicate with slave devices supporting PROFIBUS DPV0/V1 protocol.
The ProLinx PDPMV1 PROFIBUS Master module acts as a PROFIBUS network scanner, transferring Input and Output data between PROFIBUS devices and the network.
- Master Busview configuration interface via included ProSoft Configuration Builder software (see PSW-PCB)
- Project-unique GSD file import library
- Monitoring and Modification of process data and DPV1 acyclic data
- Multi-drop on a PROFIBUS DPV1 network drop with other compatible devices
- Ability to be used with a repeater as a PROFIBUS Master with PROFIBUS PA slaves on the network
- Automatic project documentation
- Automatic Bus Parameter calculation
- Online slave diagnostics
- Supports all standardized baud rates, up to 12Mbps
- Supports extended diagnostic data (DPV1)
- Auto baud detection at all valid PROFIBUS DPV1 rates
- Multiple modules can be placed in a single rack
- CRC checksum determination of slave configuration consistency to processor
- Master Status LED Indicators for Operations, Network Drop Communication, Master Token-Hold
- FDT/DTM PROFIBUS master transport communication DTM software included (see PSW-CDTM-PDPM)
PROFIBUS Master Specifications
- Up to 125 Slaves can be connected with a repeater
- Up to 1536 cyclic bytes (768 words) input and 1536 bytes (768 words) output data
- Supports Extended Diagnostic Data
- RS-485 optically isolated PROFIBUS Interface with on board DC-DC converter
- Acyclic communications (DPV1), Read and Write
- Alarm Handling (DPV1)
- Supports Sync and Freeze commands
- Supports PROFIdrive 3.1 compliant parameter read and write operations
- Supports Multicast and Broadcast telegrams (DPV1)
PROFIBUS Master Port
- DB-9F Optically Isolated RS-485
- Ready, Run, Error and Token LED Indicators
- PROFIBUS DPV1 RS-485 interface with a 9-pin D shell female connector and isolated Opto-Couplers
Protocol Specifications
The PROFIBUS DP Master protocol driver supports complete Master specifications according to IEC 61158 on either a Mono-Master or Multi-Master network. The module supports the DPV1 specification.
Certifications
| Ex Certificate (ATEX Directive) | 114,27 kB | Dernière Modification 11/11/2013 |
| CB Safety | 35,78 kB | Dernière Modification 27/08/2012 |
| Declaration of Conformity (RoHS/CE) | 301,05 kB | Dernière Modification 04/03/2018 |
| Russian GOST-R | 7,07 MB | Dernière Modification 22/02/2013 |
| GOST-R Declaration of Conformity | 6,68 MB | Dernière Modification 22/02/2013 |
| UL/cUL; Class 1, Div 2 | 1,08 MB | Dernière Modification 02/07/2013 |
| UL/cUL; Class 1, Div 2 (Canada) | 1,10 MB | Dernière Modification 02/07/2013 |